Electronic digital thermometer, to provide you with the most accurate temperature measurement

Have a quick look at this Electronic digital thermometer.

• Fast 1-minute readout
• Dependable accuracy +/- 1 Degree Celsius
• Digital ready, easy to read
• Memory
• Automatic shut-off

NOTE: BATTERY INCLUDED FOR HONG KONG LOCAL SHIPMENTS ONLY. BATTERY EXCLUDED FOR ALL OVERSEA SHIPMENTS.

Features

1. Easy to read digital LCD (liquid crystal display)
2. Compact, accurate, and durable LSI (large scale Integration) device.
3. Temperatures can be taken under an arm (axillary use) or under the tongue (oral use)
4. Very sensitive device. Quick to obtain results
5. If the thermometer is inadvertently left on after temperature stabilization, it will automatically shut off in 8-10 minutes.
6. Small, light-weight unit (12 grams). Universal in use for the whole family.
7. ABS resin body presents no hazard compared to broken mercury glass thermometer.

Specifications

Range: 32°C-42.9°C (90.0°F-109.9°F)

Accuracy:

• ±0.1°C 35.5°C-42.0°C (±0.2°F 95.9°F-107.6°F)
• ±0.2°C under 35.5°C or above 42.0°C (±0.4°F under 95.5°F)

Display: Liquid crystal display, 3/12 digits

Battery: One 1.55V button size battery (UCC392 or LR41)

Power consumption: 0.15 milliwatts in measurement mode

Battery life: More than 200 hours of continuous operation

Weight: Approx 12 grams including battery

Dimensions: 12mm by 22mm by 145 mm

Alarm: Approx. 10 seconds sound signal when peak temperature reached

Precautions

1. Do not drop the unit; it is not shockproof.
2. Do not soak the display in water. Only the probe is waterproof.
3. Do not boil the probe; instead, clean the unit by wiping it with a dry cloth and sterilize the probe with ethyl (rubbing) alcohol.
4. Do not allow the unit to come into contact with any thinner or chemical solvents.
5. Do not store the unit in direct sunlight or at high temperatures.
6. Do not bend the unit.
7. Do not attempt to disassemble the unit except to replace the battery.

How to replace the battery?

When the battery is almost exhausted, a symbol will appear in the display window.

1. Remove the battery cover.
2. Use a toothpick or insulated probe to remove the battery. Avoid using any sharp metal object in this operation.
3. Insert the new battery. (Note: Ensure battery polarity is correctly placed. The battery should be inserted with the positive side (+) facing up and the negative side (-) side facing down).
4. Replace and fasten the cover securely.

Warning:

• Swallowing a button battery may be fatal.
• Do not attempt to recharge the battery.
• Do not dispose of the battery in or near a fire as it may explode.

How to use?

1. Press the on/off button. The display will read 188.8°C (188°F).
2. Release the power switch and the display will show L°C (or L°F) with °C (or °F) flashing.
3. Disinfect the probe with ethyl (rubbing) alcohol. Position the probe.
4. Once the degree sign (°C or °F) on the display has stopped flashing (usually within 30 to 60 seconds), the correct temperature is indicated; the temperature reading will not change after the °C (°F) stops flashing. For the beeper model, only an alarm signal will sound for approximately 10 seconds when °C (°F) stops flashing.
5. To avoid any influence from surrounding air, fold the arm over the chest, tightly covering the probe tip under the arm or put the probe tip under the tongue and close the mouth while taking the temperature.
6. Remove the thermometer and carefully avoid pressing the on-off button. The temperature may be read before or after removal because the display will retain the stabilized temperature reading.
7. The unit will automatically turn off in 8-10 minutes. However, to prolong the life of the battery, it is best to press the power switch once the temperature has been noted to turn it off.

Non-Contact Forehead Infrared Thermometer

If you want to know another type of thermometer, please click the following.

Non-Contact Forehead Infrared Thermometer